Dannmar’s DLR-6 low-rise lifts helps you easily raise vehicles weighing up to 6,000 lbs. and even do so using less shop area. These work well in both commercial shops and for car enthusiasts who need to raise a vehicle for most maintenance type repairs. With the ability to raise the vehicle a little more than two feet, oil changes, tires, brakes, and lower body detailing becomes easier.
Fast Free Shipping
3-Years Limited Warranty
|Max. Lifting Height||29"|
The DLR-6 is collapsible down to just 4”. This low profile allows lowered cars, sport sedans, vehicles with spoilers, and of course up to light trucks and SUVs. No need to get out a floor jack or have two of your crew try to raise the suspension by hand as you drive over the lift.
Single-point safety release
One operator can release the lift. A single-point release feature on the control panel makes it so both locks can safely release simultaneously.
Your lift needs to have clearance in the proper areas. So right in the center, a dropped crossbar permits additional drive-over clearance and the DLR-6 crossbar improves strength and rigidity.
Rugged steel channel frame
A strong steel channel provides the base support of the DLR-6. Plus, the Dannmar lift comes with a five-year warranty.
Industrial-grade hydraulic cylinder
Two of Dannmar’s high-quality hydraulic cylinders are used on each frame of this low-rise lift. Each features zero-leak technology for ultimate durability.
Robust solid-rubber lift blocks
Standard rubber blocks are long-lasting and durable.
|Lifting Capacity||6,000 lbs. (2,724 kg)|
|Lowered Height||4” (102 mm)|
|Max. Lifting Height (w/o Adapters)||26” (660 mm)|
|Max. Lifting Height + 1.5" Blocks||27.5” (699 mm)|
|Max. Lifting Height + Optional 3" Blocks||29” (737 mm)|
|Pad Length||53” (1,346 mm)|
|Overall Width||70.5” (1,791 mm)|
|Overall Length||82” (2,083 mm)|
|Tow Cart Height||47.5” (1,209 mm)|
|Tow Cart Width||14.75” (374 mm)|
|Tow Cart Depth||8.25” (210 mm)|
|Lifting Time||45 sec|
|Motor||110-VAC / 50-60 Hz / 1Ph|