D4-9 Package

9,000-lbs. Capacity Four-Post Lift / Standard Rise, Standard Length / Includes Caster Kit, Drip Trays, and Aluminum Ramps
$3,995.00
SKU 5175319
Order

D4-9 Package

Four-Post Lift

Dannmar’s D4-9 is a great lift for many reasons. With its 9,000 lb. lifting capacity, it can typically handle close to twice what the average vehicle weighs. Dannmar’s D4-9 is straightforward to install on level concrete. As delivered it comes with a caster kit, drip trays, plus lightweight and strong aluminum ramps. By installing this lift, you can add a place to store a vehicle and also to perform many repairs and maintenance jobs. Check out Dannmar’s 9K section to see what other options are available.

Lifting Capacity 9,000-lbs.
Overall Height 98"
Overall Width 114.5"
Overall Length 203"
Max. Lifting Height 75"

View all specifications

Essential Accessories

Subtotal: $0.00

Overview

Dannmar’s D4-9 four-post vehicle lift is built sturdy and strong. Each includes quality features like dual-hub cable sheaves. These are more expensive to manufacture, but it’s not a cost we pass along. Dannmar includes them to prevent axles, sheaves and cables from burning out. Dannmar lifts also include multi-level locking positions, so that you can safely secure your four-post lift at multiple heights managed by an electric-hydraulic power system. Each lift comes with four lifting cables made from superior-grade stainless steel. The individual cable is rated to handle 14,400 lbs. making the combined cable rating over 640% of the total capacity. Big 10" x 12" base plates keep the lift securely in place on level concrete. A Four-piece caster kit that fits all Dannmar 9K four-post lifts allows the lift to be moved, even with a car on top while you move it. All lifting cables, airlines, safety latches and sheaves are routed internally throughout the car lift. Four-post runways built to a low 4.5" that are undercarriage-friendly for short wheelbase sports cars, lowered vehicles, and everyday cars.

Features

  • Long approach ramps for low-ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Heavy-duty 1/2” aircraft cable and 1.75” roller axles
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Large self-lubricating cable rollers
  • Multi-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks
  • Independent backup slack-cable safety latches
  • Runways feature smooth durable surface
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 4,500-lb. capacity rolling jacks available to raise front or rear of vehicle

Specs

SKU# 5175319
Lifting Capacity 9,000 lbs. (4,082 kg)
A - Min. Runway Height 5” (127 mm)
B - Max. Rise 70” (1,778 mm)
C - Max. Lifting Height 75” (1,905 mm)
D - Height of Columns 89” (2,261 mm)
E - Drive-Thru Clearance 86” (2,184 mm)
F - Overall Width 114.5” (2,908 mm)
G - Width Between Columns 98” (2,489 mm)
H - Overall Length 203” (5,156 mm)
I - Outside Columns 176.5” (4,483 mm)
J - Width Between Runways 37.5” (953 mm)
K - Runway Centerline 53.75” (1,365 mm)
L - Outside Edge of Runways 72.5” (1,842 mm)
M - Runway Width 18.75” (476 mm)
N - Length of Runways 165.5” (4,204 mm)
Min. Wheelbase @ Rated Capacity 115” (2,921 mm)
Min. Wheelbase @ 75% Capacity 100” (2,540 mm)
Min. Wheelbase @ 50% Capacity 85” (2,159 mm)
Min. Wheelbase @ 25% Capacity 70” (1,778 mm)
Locking Positions 13 (spaced every 4” / 102 mm)
Time to Full Rise 60 seconds
Motor 110VAC, 50-60HZ, 1PH, 20A or 208-230VAC, 50-60HZ, 1PH, 25A
Dannmar D4-9 four-post lift floor diagram
My Cart