Frame Cradle Pads
Fits Two-Post Lift
If you are working on full-size trucks, vans, or SUVs, then you may be interested in outfitting your two-post lift with Dannmar’s Frame Cradle Pad adapters that stay fixed in position. Your truck or SUV’s full-perimeter frame fits securely onto the U-shaped steel channel, preventing any potential side-to-side movement off the frame while the lift is raising or up in the air.
Downloads
Overview
Frame Cradle Pads for Trucks & SUVs
When you’re putting a full-frame truck or SUV up in the air, you want to make sure that the lifting pads stay located. That’s because unlike a passenger car, a truck’s perimeter frame is tall, narrow, and often requires a need to make it around side-steps or add-on exhaust systems. A flat lift pad, if not perfectly positioned below the frame can move or slip away from the frame as the lift is raised, especially with winter driving snow and mud.
With these Dannmar U-shaped frame cradle pads, the raised sides lock and hold the frame lifting point without the risk of slipping off-center. Dannmar’s frame cradle pads incorporate a U-shaped steel construction that keeps the cradle pad firmly centered on the frame, while the treaded rubber mats protect, cushion, and grip the contact area. And with a 35 mm diameter pin, your Frame Cradle Pads will drop into Dannmar’s two-post lift arms with ease.
Features
- Perfect for use with a Dannmar two-post lift
- Accommodates 35 mm assemblies
- U-Shaped Cradle Pad with sturdy steel construction does not allow side-to-side movement
- Gripping rubber mat cushions and holds the contacting lift points
- Sold in sets of four
Specs
| Fits | Two-Post Lifts |
|---|---|
| SKU# | 5215754 |
| Pin Diameter | 35 mm |
| Pin Height | 43 mm |
| Width | 5” (125 mm) |
| Length | 4.25” (110 mm) |
| Rubber Pad Dimensions | 4” (102 mm) x 4” (102 mm) |
WARNING: California's Proposition 65